VapeStix Evod Kit

  • $19.95

The VapeStix Evod Kit is a device used for E-liquid Only. This is the best starting point for new vapers with a basic device that uses the quality MT3 coil system. The Evod Kit is packed into a zip-pouch for convenient carrying. The Evod Battery has an internal rechargeable 1100mAh battery with a constant voltage output of 3.3 Volts to 4.2 Volts. The Evod Tank can hold a capacity of 2.4ml of E-liquid and utilises the VapeStix MT3 Coils.



  • Entry-level Vape
  • Compact and Easy to Use
  • 1100mAh Internal Rechargeable Battery
  • One Button Operation (5 Clicks On/Off)
  • LED Indication
  • Voltage Output Range: 3.3 Volts - 4.2 Volts
  • E-liquid Capacity: 2.4ml
  • eGo 510 Connection


  • 1 x VapeStix Evod Zip Pouch
  • 1 x VapeStix Evod Battery
  • 1 x VapeStix Evod Tank
  • 2 x VapeStix Evod MT3 Coils
  • 1 x 510 eGO USB Charging Cable
  • 1 x User Manual


If you think this is the right kit for you and someone you know would also like to try the VapeStix Evod, Click Here to Save on 2 Evod Kits!


Note: Due to a slight manufacturing error, the Pink colour battery and tank is slightly off. For purchasing the pink colour, we will add a 30ml Cloud Mix e-liquid!


Additional parts and accessories for the VapeStix Evod:

How to Set Up the VapeStix Evod in 9 Quick and Easy Steps:

  1. Unthread the Evod Tank from the Evod Battery
  2. Unthread the bottom stainless steel base from the Evod Tank
  3. Unthread the coil from the base
  4. Prime the coil (1 drop of e-liquid on each side, 1 down the centre)
  5. Thread the coil onto the base finger-tight
  6. Fill the tank upside-down
  7. Thread coil-first into the tank finger-tight
  8. Thread the Evod Tank onto the Evod Battery finger-tight
  9. Inhale without pushing the button 5 times
  10. Vape away!


How to Maintain the VapeStix Evod:

  • Prime a new coil, always (1 drop of e-liquid on each side, 1 down the centre)
  • If you experience any leaking, disassemble the tank, clean, and put it back together
  • Make sure the battery connection is dry
  • Do not get the button wet
  • Turn off when not using (5 clicks on/off)
  • Change the coil when the flavour begins to whither away
  • Rinse the tank and base without the coil under hot water when changing flavours

We Also Recommend